Duct Wrap
KDIP "Zero perm Facing(ALUGLASS)"

KDIP Ultra

Fire resistance
Thermal
Water Resistance
KDIP Ultra is a semi-rigid or rigid boards or roll with factory applied ALUGLASS (aluminium foil /glass fabric laminate) facing as vapor barrier. Normally recommended for outdoor duct works and where high mechanical strength is needed.
Read more
Read less

Key Facts

  • No water vapor can penetrate as ALUGLASS achieves zero water vapor permeability.
  • KDIP can be used with no additional requirement of handling and weather protection such as application of canvas + vapor barrier.
  • KDIP is rot proof, resists the effects of moisture and will not decompose through continual exposure to the elements.
  • KDIP will not shrink due to the age or temperature variations.
  • KDIP will maintain its thermal properties throughout the lifetime of the construction.
  • KDIP is compatible to direct painting. It is recommended to use only anti-fungal and antibacterial paints on KDIP in areas where services are exposed like malls, exhibition center etc. for aesthetic finish. This will save costly metallic cladding

Product description

KDIP is manufactured from stable glass fibers bonded with thermo-setting resins, in the form of blankets, semi-rigid or rigid boards with factory applied ALUGLASS (aluminium foil /glass fabric laminate) facing as vapor barrier. KDIP has a high resistance to accident damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot proof, odourless, non-hygroscopic and will not sustain vermin and fungus. Easy to clean. 

KDIP can be used with no additional requirement of handling and weather protection such as application of canvas + vapor barrier

SILENT FEATURES

  • ALUGLASS is aluminum foil laminated with glass fabric.
    • It has extremely high bursting strength of 270 psi i.e. 3-4 times higher than that of conventional facings.
    • It has extremely high tensile strength of 14.5 KN/m i.e. 3-4 times higher than that of conventional facings.
    • ALUGLASS has high mechanical strength and durability 
    • No water vapor can penetrate as ALUGLASS achieves zero water vapor permeability.
    • KDIP can be used with no additional requirement of handling and weather protection such as application of canvas + vapor barrier.
    • KDIP is compatible to direct painting.
    • It is recommended to use only anti-fungal and antibacterial paints on KDIP in areas where services are exposed like malls, exhibithion centres etc. for aesthetic finish. This will save costly metallic cladding

 

MOISTURE ABSORPTION 

Less than 1% by volume when tested in accordance with ASTM C 1104. KDIP does not absorb moisture from the ambient air nor water by capillary attraction. Only water under pressure can enter the insulation products, but that will quickly dry out owing to the material's open cell structure. ALUGLASS faced Duct insul plus complies with ASTM E 96 Desiccant method. Permeability not to exceed ZERO perms (Federal Standard HH-B-100 B Type 1)

 

FIRE SAFETY

Fibers are non combustible when tested in accordance with BS 476 (part 4), ASTM E 136, KDIP achieves Class 1 when tested as per BS 476 (Part 7). IS01182 ALUGLASS facing achieves Class 0 when tested as per BS 476 (Part 6 and Part 7). Flame spread: Not over 25 and Smoke developed: Not over 50. When tested in accordance with ASTM E 84.

Technical description

Characteristic

Symbol

Unit

Quantities and measured values

Standard

Thermal Conductivity

T

(°C)

25

 

ASTM C518

l

( W /m·K )

0.031

Density

Rolls

ρ

(kg/m3)

48  (Tolerance: ± 15%)

ASTM C167

Dimensions

L, W, T

(m)

(6.0 – 25.0), (1.2), (0.012 – 0.050)

Density

Slab/Boards

ρ

(kg/m3)

48  (Tolerance: ± 15%)

ASTM C303

Dimensions

L, W, T

(m)

(1.0  - 2.4), (1.2), (0.015 – 0.120)

Facing

Faced with ALUGLASS

 Reaction to Fire Class (Unfaced)

 Euro-class A1

Non-combustible

EN 13501-1

ASTM E136

Surface Burning Characteristics

-Flame Spread Index

-Smoke Developed Index

 

≤ 25

≤ 50

ASTM E84

Water Vapour Sorption

(%)

< 1 (by volume)

ASTM C1104

Maximum Service Temperature 

Min.

Max. (Fiber)

Max. (Facing)

°C

 

-50

+232

+100

ASTM C411

Fungi Resistance

Do not promote fungi growth

ASTM C1338

Stress Corrosion to Austenitic Stainless Steel.

No Cracking observed

ASTM C871

Corrosiveness to Steel

No Corrosion

ASTM C665

Ozone Depletion Potential (ODP)

‘0’

-

Global Warming Potential (GWP)

<5

-

Rigidity

Semi-Rigid/Flexible

ASTM C1101

Standard Compliance

ASTM C612 Type IA & IB

ASTM C553, ASTM C665

Product variations

Articles information
Name Density [kg/m3] Facing Thml resistance Packaging (Slab) Thickness (mm) Width (m) Lenght (m)
NameKDIP Ultra Density [kg/m3]48 FacingAluglass Thml resistance2.42 Packaging (Slab)2 Thickness (mm)75 Width (m)1 Lenght (m)1.2
NameKDIP Ultra Density [kg/m3]48 FacingAluglass Thml resistance0.81 Packaging (Slab)1 Thickness (mm)25 Width (m)1.2 Lenght (m)20
NameKDIP Ultra Density [kg/m3]48 FacingAluglass Thml resistance1.61 Packaging (Slab)1 Thickness (mm)50 Width (m)1.2 Lenght (m)10
NameKDIP Ultra Density [kg/m3]48 FacingFSK Thml resistance2.42 Packaging (Slab)4 Thickness (mm)75 Width (m)1 Lenght (m)1.2
NameKDIP Ultra Density [kg/m3]48 FacingAluglass Thml resistance0.81 Packaging (Slab)12 Thickness (mm)25 Width (m)1 Lenght (m)1.2
NameKDIP Ultra Density [kg/m3]48 FacingAluglass Thml resistance1.61 Packaging (Slab)6 Thickness (mm)50 Width (m)1 Lenght (m)1.2
NameKDIP Ultra Density [kg/m3]48 FacingFSK Thml resistance1.61 Packaging (Slab)1 Thickness (mm)50 Width (m)1.2 Lenght (m)10
Notes

Other dimensions, and density are available on request