Duct Wrap
Self-Seal "Self adhesive Glass wool"

Self-seal KDIP Ultra

Thermal
Water Resistance
To improve onsite productivity and to do away with flammable glue on construction site, KDIP Self-Seal was developed. The product is available in the form of blankets, semi-rigid or rigid boards with factory applied ALUGLASS (aluminium foil /glass fabric laminate) facing as vapor barrier on one side and self-adhesive facing on another side.
Read more
Read less

Key Facts

  • Thermal conductivity λ= 0.033 w/mK
  • Eliminates the need of liquid insulation adhesive
  • Superior thermal insulation properties
  • Strong and full adhesion the duct surface
  • Ease of installation
  • Strong and moisture resistant facing "Zero" Perm - No need for additional Vapour barrier coating 
  • Long life – No aging
  • Environmentally friendly

Product description

KDIP Self-Seal is manufactured from stable glass fibers bonded with thermo-setting resins, in the form of blankets, semi-rigid or rigid boards with factory applied ALUGLASS (aluminium foil /glass fabric laminate) facing as vapor barrier.

KDIP Self-Seal has a high resistance vapor barrier resist accidental damage from knocks and handling during installation and maintenance. This facing has a permeability rating of "Zero" perms thus there is no need for addition vapor barrier coatings.

The product is dimensionally stable under varying conditions of temperature and humidity, rot proof, odourless, nonhygroscopic and will not sustain vermin and fungus. Easy to clean.

Savings: Cost, Time and Carbon foot prints

  • Eliminates the need of liquid insulation adhesive
  • Eliminates the use of insulation fastener pins
  • Thermal comfort with Low energy consumption
  • Savings on manpower and logistic cost & time
  • Reduced project lead time due to easy of application

Technical description

Characteristic

Symbol

Unit

Quantities and measured values

Standard

Thermal Conductivity

T

(°C)

25

 

ASTM C518

l

( W /m·K )

0.031

Density

Rolls

ρ

(kg/m3)

48  (Tolerance: ± 15%)

ASTM C167

Dimensions

L, W, T

(m)

(6.0 – 25.0), (1.2), (0.012 – 0.050)

Density

Slab/Boards

ρ

(kg/m3)

48  (Tolerance: ± 15%)

ASTM C303

Dimensions

L, W, T

(m)

(1.0  - 2.4), (1.2), (0.015 – 0.120)

Facing

Faced with Aluglass with Self-Seal

 Reaction to Fire Class (Unfaced)

 Euro-class A1

Non-combustible

EN 13501-1

ASTM E136

Surface Burning Characteristics

-Flame Spread Index

-Smoke Developed Index

 

≤ 25

≤ 50

ASTM E84

Water Vapour Sorption

(%)

< 1 (by volume)

ASTM C1104

Maximum Service Temperature 

Min.

Max. (Fiber)

Max. (Facing)

°C

 

-50

+232

+100

ASTM C411

Fungi Resistance

Do not promote fungi growth

ASTM C1338

Stress Corrosion to Austenitic Stainless Steel.

No Cracking observed

ASTM C871

Corrosiveness to Steel

No Corrosion

ASTM C665

Ozone Depletion Potential (ODP)

‘0’

-

Global Warming Potential (GWP)

<5

-

Rigidity

Semi-Rigid/Flexible

ASTM C1101

Standard Compliance

ASTM C612 Type IA & IB

ASTM C553, ASTM C665

Videos

Product variations

Articles information
Name Density [kg/m3] Facing Thml resistance Packaging (Slab) Thickness (mm) Width (m) Lenght (m)
NameKDIP Self-seal Ultra Density [kg/m3]48 FacingSelf-Seal Aluglass Thml resistance0.81 Packaging (Slab)12 Thickness (mm)25 Width (m)1 Lenght (m)1.2
NameKDIP Self-seal Ultra Density [kg/m3]48 FacingSelf-Seal Aluglass Thml resistance1.61 Packaging (Slab)6 Thickness (mm)50 Width (m)1 Lenght (m)1.2
NameKDIP Self-seal Ultra Density [kg/m3]48 FacingSelf-Seal Aluglass Thml resistance0.81 Packaging (Slab)1 Thickness (mm)25 Width (m)1.2 Lenght (m)10
NameKDIP Self-seal Ultra Density [kg/m3]48 FacingSelf-Seal Aluglass Thml resistance1.61 Packaging (Slab)1 Thickness (mm)50 Width (m)1.2 Lenght (m)10
Notes

Other densities, facings, or dimensions are available on request