Self-Seal KDIP Premium
Key Facts
- Thermal conductivity λ= 0.035 w/mK
- Eliminates the need of liquid insulation adhesive
- Eliminates the use of insulation fastener pins
- Superior thermal insulation properties
- Strong and full adhesion the duct surface
- Ease of installation
- Strong and moisture resistant facing "Zero" Perm - No need for additional Vapour barrier coating
- Long life – No aging
- Environmentally friendly
Product description
KDIP Self-Seal is manufactured from stable glass fibers bonded with thermo-setting resins, in the form of blankets, semi-rigid or rigid boards with factory applied ALUGLASS (aluminium foil /glass fabric laminate) facing as vapor barrier.
KDIP Self-Seal has a high resistance vapor barrier resist accidental damage from knocks and handling during installation and maintenance. This facing has a permeability rating of "Zero" perms thus there is no need for addition vapor barrier coatings.
The product is dimensionally stable under varying conditions of temperature and humidity, rot proof, odourless, nonhygroscopic and will not sustain vermin and fungus. Easy to clean.
Savings: Cost, Time and Carbon foot prints
- Eliminates the need of liquid insulation adhesive
- Eliminates the use of insulation fastener pins
- Thermal comfort with Low energy consumption
- Savings on manpower and logistic cost & time
- Reduced project lead time due to easy of application
Technical description
Characteristic |
Symbol |
Unit |
Quantities and measured values |
Standard |
|
---|---|---|---|---|---|
Thermal Conductivity |
T |
(°C) |
25 |
ASTM C518 |
|
l |
( W /m·K ) |
0.035 |
|||
Density |
Rolls |
ρ |
(kg/m3) |
24 (Tolerance: ± 15%) |
ASTM C167 |
Dimensions |
L, W, T |
(m) |
(6.0 – 36.0), (1.2), (0.015 – 0.150) |
||
Density |
Slab/Boards |
ρ |
(kg/m3) |
24 (Tolerance: ± 15%) |
ASTM C303 |
Dimensions |
L, W, T |
(m) |
(1.0 - 2.4), (1.2), (0.025 – 0.200) |
||
Facing |
Faced with Aluglass with Self-Seal |
||||
Reaction to Fire Class (Unfaced) |
Euro-class A1 Non-combustible |
EN 13501-1 ASTM E136 |
|||
Surface Burning Characteristics -Flame Spread Index -Smoke Developed Index |
≤ 25 ≤ 50 |
ASTM E84 |
|||
Water Vapour Sorption |
(%) |
< 1 (by volume) |
ASTM C1104 |
||
Maximum Service Temperature Min. Max. (Fiber) Max. (Facing) |
°C |
-50 +232 +100 |
ASTM C411 |
||
Fungi Resistance |
Do not promote fungi growth |
ASTM C1338 |
|||
Stress Corrosion to Austenitic Stainless Steel. |
No Cracking observed |
ASTM C871 |
|||
Corrosiveness to Steel |
No Corrosion |
ASTM C665 |
|||
Ozone Depletion Potential (ODP) |
‘0’ |
- |
|||
Global Warming Potential (GWP) |
<5 |
- |
|||
Rigidity |
Semi-Rigid/Flexible |
ASTM C1101 |
|||
Standard Compliance |
ASTM C612 Type IA & IB ASTM C553, ASTM C665 |
Videos
Product variations
Name | Density [kg/m3] | Facing | Thml resistance | Packaging (Roll) | Thickness (mm) | Width (m) | Lenght (m) |
---|---|---|---|---|---|---|---|
NameKDIP Self-Seal Premium | Density [kg/m3]24 | FacingSelf-Seal Aluglass | Thml resistance0.71 | Packaging (Roll)1 | Thickness (mm)25 | Width (m)1.2 | Lenght (m)10 |
NameKDIP Self-Seal Premium | Density [kg/m3]24 | FacingSelf-Seal Aluglass | Thml resistance1.43 | Packaging (Roll)1 | Thickness (mm)50 | Width (m)1.2 | Lenght (m)10 |
Other densities, facings, or dimensions are available on request